Easy DIY Drapery Pleat Pins

Red Drapery Pleat Pins

Easy DIY Drapery Pleat Pins

Life is Easy with DIY Drapery Pleat Pins. So excited to share this great new product.  You now can change the look of any ready made drapery or custom drapery by using the new Drapery Pleat Pins.  Just measure, assemble and hang.  Lots of color options with Drapery Pleat Pins.

Red Drapery Pleat Pins
Ready for any Drapery Panel, Drapery Pleat Pins

Pleating and hanging drapes with PLEAT PINS is fast and easy. There is NO SEWING and no special equipment required. The drapery panel header is punched with pairs of holes to accommodate the thumbscrews, which are screwed by hand, into the loop component of the PLEAT PINS. The fabric is gripped between the loop component and the perimeter of the thumbscrew head.

The PLEAT PIN accommodates fabric of any texture, thickness or weight, up to 10 pounds per PLEAT PIN, to form precise and generous pleats.

The pleats remain parallel from the header to the hem and are appropriate for modern and classic interiors – both formal and informal. The resulting refined, tailored look makes PLEAT PIN drapes the perfect window treatment for today’s interiors. The drapes retain a classic pleated look whether open or closed.

The ability to quickly assemble, hang up and take down the drapery panels allows for easy changing or laundering. The panels themselves remain flat when removed so they can be more efficiently cleaned and pressed than typical panels where the pleats are sewn in the header.

The size of the pleats can be adjusted to accommodate the width of the drapery panel. The vertical side edge of the drapery panel can return as usual or the last pleat can be rolled around to the back to be captured by the adjacent PLEAT PIN forming a clean and substantial tubular end finish.

The PLEAT PINS remain perpendicular to the rod when the drapes are pulled and since only a small surface area rests on the rod, they slide easily when opening or closing. This is not the case with grommets, which turn when pulled, making movement difficult.

PLEAT PINS can be fabricated in any color. They can be opaque or transparent, clear or tinted, smooth or frosted or pearled with a gloss or frosted finish. They can be plated with any metal in a matte or high gloss finish.

Set of 10 Pleat Pins

Made for Rod Sizes:  5/8″ – 3/4″ – 7/8″ – 1″

Actual Pin Measurements: Ring Width 1 1/8″ – Height 3 1/8″ – Base Width 1 3/4″

No Comments

Leave a Reply